• 該測量原理具有高可操作測量范圍，能直接測量質量流量

• 專業測量導電和非導電液體流量

儀表特性

• 插入型適用于公稱管徑為 DN 40 ~ 1000 (1 1/2 ~ 40")的管道

• 標準型傳感器或衛生型傳感器

• 耐SIP清洗，溫度可達130 °C (266 °F)

• 一體化型帶 DC 24 V 電源供電

• 4-20 mA HART, 脈沖/頻率/開關量輸出

• 緊湊和堅固的變送器

特征和規格

測量原理	熱式質量流量計
產品標題	The flowmeter for reliable and easy monitoring of liquids. Dedicated to the monitoring of conductive and non‐conductive liquids.
傳感器特點	High process safety – high repeatability and linearity due to integrated temperature compensation. Cost‐effective measurement – easy installation, negligible pressure loss and maintenance‐free. Reliable flow trending – multivariable measurement. Insertion version for nominal diameter DN 40 to 1000 (1½ to 40"). Sensor in standard or hygienic version.
變送器特點	Fast and efficient commissioning – guided operating menus. High plant availability – self‐diagnostics and error monitoring. Automatic recovery of data for servicing. Device in compact version with DC 24 V power supply. 4‐20 mA HART, pulse/frequency/switch output.
公稱口徑范圍	DN 40 to 1000 (1½ to 40")
接液部件材質	Transducer: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022) Insertion tube: 1.4404 (316/316L); Alloy C22, 2.4602 (UNS N06022) Connection: ‐ Compression fitting: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022) ‐ Threadolet: 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022) ‐ Clamping ferrule: PEEK 450G; 1.4404 (316L); Alloy C22, 2.4602 (UNS N06022) ‐ Tri‐Clamp; DN40 DIN 11851, DN50 DIN 11851; DN40 DIN 11864‐1A, DN50 DIN 11864‐1A: 1.4404 (316L)
測量變量	Mass flow, temperature, volume flow
*大測量誤差	Flow: ±5 % o.f.s.
測量范圍	226 to 14 100 000 l/h (60 to 3 730 000 gal/h) (under reference conditions)
*大過程壓力	PN 40
介質溫度范圍	–20 to +100 °C (–4 to +212 °F)
環境溫度范圍	–40 to +60 °C (–40 to +140 °F)
變送器外殼材質	AlSi10Mg, coated
防護等級	IP66/67, type 4X enclosure
顯示/操作	4‐line display with push buttons Configuration via local display and operating tools possible
輸出	4‐20 mA HART (active) Pulse/frequency/switch output (passive)
輸入	Status input
數字式通信	HART
電源	DC 18 to 30 V
危險區認證	ATEX, IECEx, cCSAus
其他認證和證書
計量認證和證書	Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025), NAMUR
壓力認證和證書	CRN
船級證書	3.1 material
衛生型認證和證書	Sanita