• 測量原理不受流體物理屬性影響，比如粘度、濃度等。

• 可**測量多種極少量的液體或氣體，是打滑集成的理想選擇。

設備參數

• 常規公稱直徑:DN 1 - 6(1/24至1/4”)

• 過程壓力可高達400bar(5800 psi)

• 介質溫度可高達+205 °C (+401 °F)

• 堅固、極端緊湊的變送器外殼

• 高入口保護：IP69K

• 預配置插頭

特征和規格

測量原理科氏力質量流量計產品標題The ultra‐compact sensor for smallest quantities wth an ultracompact transmitter. For smallest quantities of liquids and gases; ideal for skid integration.
傳感器特點Reduced installation cost – compact single‐ ube design. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space‐saving installation – no in/outlet run needs. Nominal diameter: DN 1 to 6 (¹⁄ to ¹⁄"). Process pressure up to 400 bar (5800 psi).
變送器特點Space‐saving transmitter – full functionality on smallest footprint. Time‐saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology. Robust, ultra‐compact transmitter housing. High ingress protection: IP69.
公稱口徑范圍DN 1 to 6 (¹⁄ to ¹⁄")
接液部件材質Measuring tube: 1.4539 (904L)
Connection: 1.4539 (904L); 1.4404 (316/316L)
測量變量Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
*大測量誤差Mass flow (liquid): ±0.1 %
Volume flow (liquid): ±0.1 %
Mass flow (gas): ±0.5 %
Density (liquid): ±0.0005 g/cm3
測量范圍0 to 1000 kg/h (0 to 37 lb/min)
*大過程壓力PN 40, Class 300, 10K, 400 bar (5800 psi)
介質溫度范圍–50 to +205 °C (–58 to +401 °F)
環境溫度范圍Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
傳感器外殼材質1.4301 (304), corrosion resistant
變送器外殼材質Compact: AlSi10Mg, coated
Compact/ultra‐compact: 1.4301 (304)
防護等級Standard: IP66/67, type 4X enclosure
Option: IP69
顯示/操作4‐line backlit display available (no local operation)
Configuration via web browser and operating tools possible
輸出4‐20 mA HART (active)
Pulse/frequency/switch output (passive)
輸入None
數字式通信HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET
電源DC 20 to 30 V
危險區認證ATEX, IECEx, cCSAus, INMETRO, NEPSI
產品安全性CE, C-Tick
計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV Attestation)
壓力認證和證書CRN
船級證書3.1 material