• 測量原理不受流體物理特性的影響(例如：粘度和密度)。

• 在標準應用中進行液體和氣體的高精度測量，應用廣泛。

儀表特點

• 一體式雙測量管傳感器

• 介質溫度：max. +150 °C (+302 °F)

• 過程壓力：max. 100 bar (1450 psi)

• 分體式儀表，*多帶4路輸入/輸出

• 背光顯示、觸摸鍵控制和WLAN訪問

• 傳感器和變送器通過標準電纜連接

特征和規格

測量原理科氏力質量流量計產品標題The flowmeter with minimized total cost of ownership, as remote version with up to 4 I/Os. Accurate measurement of liquids and gases for a wide range of standard applications.
傳感器特點Cost-effective – multi-purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F).
變送器特點Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access.
公稱口徑范圍DN 8 to 80 ( to 3")
接液部件材質Measuring tube: 1.4539 (904L) 
Connection: 1.4404 (316/316L)
測量變量Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
*大測量誤差Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option) 
Volume flow (liquid): ±0.15 % 
Mass flow (gas): ±0.75 % 
Density (liquid): ±0.0005 g/cm³
測量范圍0 to 180 000 kg/h (0 to 6615 lb/min)
*大過程壓力PN 100, Class 600, 63K
介質溫度范圍–40 to +150 °C (–40 to +302 °F)
環境溫度范圍Standard: –40 to +60 °C (–40 to +140 °F) 
Option: –50 to +60 °C (–58 to +140 °F)
傳感器外殼材質1.4301 (304), corrosion resistant
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L)

變送器外殼材質AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
防護等級Sensor remote version (standard): IP66/67, type 4X enclosure 
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure
顯示/操作4-line backlit display with touch control (operation from outside) 
Configuration via local display and operating tools possible
輸出4 outputs: 
4-20 mA HART (active/passive) 
4-20 mA WirelessHART 
4-20 mA (active/passive) 
Pulse/frequency/switch output (active/passive) 
Double pulse output (active/passive) 
Relay output
輸入Status input 
4-20 mA input
數字式通信HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
電源DC 24 V 
AC 100 to 230 V 
AC 100 to 230 V / DC 24 V (non-hazardous area)
危險區認證ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
產品安全性CE, C-tick, EAC marking
功能安全性Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
計量認證和證書Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) 
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)
壓力認證和證書PED, CRN
船級證書3.1 material
衛生型認證和證書3-A, EHEDG